Substation Equipment
Home > Products
Size: 118*72*86mm; Max. Current: 1200A; Max. Voltage: 36kV; Mechanical Life: 2000 Times;
Application:Electric Power Transmission; Rated Voltage:12kV; Product Name:24 KV High voltage Vacuum type load Disconnector;
Product Name:High voltage switch vertical break disconnector and isolator; ap; text-overflow: ellipsis;">Product Name: High voltage switch vertical break disconnector and isolator;
we offers wide range of reliable and energy efficient disconnectors to meet the requirements of different sites and network conditions. The disconnectors range from 72.5 kV to 550 kV. Our disconnectors are designed as per IEC 62271-102 and IEC 62271-1 standards.
Advantages: light weight, double - side contact surface (up to 40 mm), its performance and service life are more than twice as long as the ordinary isolation switch.
SPDD series outdoor low-voltage fusedisconnecting switch (disconnect switch for short) mainly apply to distribution line of frequency 50/60Hz, rated voltage 380-500V.
SPD series Outdoor HV Disconnecting Switch is the single-phase hook rod operating disconnecting switch, knife switch with a self-locking device, is applied to power system with AC 50 Hz or 60 Hz, rated voltage 10-38 kV, it is used to cut off and close single phase or three-phase circuit without load and voltage. Isolating the voltage when the equipment or line maintenance to ensure safety.
Outdoor disconnect switch used in 15kV\27kV and 38 Kv power distribution systems, with currents from 200 to 630A. And it used as switching on and switching off at the voltage with no load.
GW1-12(36)/630-20(25) Outdoor HV Disconnect Switch is used to open and close circuit with voltage but no0load 50/60Hz, 12(36)KV power system. The anti-pollution type can be used in the serious pollution area. Three pole linkage, good synchronous performance.
The GW Series of outdoor high voltage isolate switch is a Single-phase AC frequency 50 Hz high voltage switch equipment. The product is suitable for power system with rated voltage 10kV. It can connect or break the power system under the circumstances of with voltage and nomload. The switch is operated by using insulating rod.
Disconnector switch is high voltage switch equipment of single phase AC50Hz. The product is suitable for power system with rated voltage 12kV to break power supply under circumstances of with voltage and nomload. The isolator is adopts isolated hook rod to operate.
Disconnector switch is high voltage switch equipment of single phase AC50Hz. The product is suitable for power system with rated voltage 12kV to break power supply under circumstances of with voltage and nomload. The isolator is adopts isolated hook rod to operate.
Disconnector switch is high voltage switch equipment of single phase AC50Hz. The product is suitable for power system with rated voltage 12kV to break power supply under circumstances of with voltage and nomload. The isolator is adopts isolated hook rod to operate.
The series of GW4 disconnectors are of double-column horizontal rotating structures, the disconnectors completely meet with the requirements of IECC6227-102 and other international standards.
The series of GW4 disconnectors are of double-column horizontal rotating structures, the disconnectors completely meet with the requirements of IECC6227-102 and other international standards.
A disconnector is suitable for switching small currents or where no significant change in voltage occurs across the terminals.
The series of GW4 disconnectors are of double-column horizontal rotating structures, the disconnectors completely meet with the requirements of IECC6227-102 and other international standards.
GFG is an SF6 insulated three-position (close, open, earth on) switch disconnector. All electrically active parts, including the earthing switch, are in robust epoxy resin housings filled with SF6 (1.45 bar).
The products' unique electric arc extinguishing and high switching capacity designs enable them an attractive solution.
The products' unique electric arc extinguishing and high switching capacity designs enable them an attractive solution.
PLBS series SF6-insulated, polemounted switch disconnector can be applied in 12kv,24kv,36kv 400A/630A,50/60Hz overhead line.
The load change over. The work speed and breaking capacity of the fuse is associated with the specific operation situation of the operator.
SIWOG1(GL) series switch-disconnector is widely used in distribution and automatic system of architecture, electrical power, petrochemical and other fields.
SIWOH1(GLR) series switch-disconnector-fuse (hereinafter called as switch for short) adopts DMC enclosure which has high dielectric property，protective capability and operating safety.