Mechanical life: 5000TIMES; Making capacity: 63/50; switching power supply: switching power supply; Product Name: electrical distribution box;
KYN28-12 armoured middle-mounted metal enclosed switchgear (hereinafter referred to as switchgear) is a new product with own design and development on the basis of absorbing advanced technology abroad, it can replace the old metal enclosed switchgears, such as KYN1-10, JYN2-10, GBC-10 series, etc.
KYN28A-1211kV withdrawable indoor AC metal-clad enclosed high voltage switch gear is suitable for 3.6~15kV three-phase AC power network of 50Hz. The equipment can be used for power distribution and control, monitoring and protection of the power circuit.
The device should be installed in the location without violent vibration and impact to prevent the electrical components from corrosion. For special requirements, please contact the manufacturer for solution.
1)Ambient temperature: -5°C-+40°C; 2)Altitude: high voltage ≤1000M, low voltage ≤2000M (technical department will design specially if exceeds); 3)Relative humidity: ≤85%;
KYN61-40.5 Metal-clad withdrawable AC metal-enclosed switchgear is used for the complete distribution equipments of power plant, transformer and hydropower plant system. The device is equipped with “Five Preventions” functions.
KYN28-12 Distribution Cabinet is designed by us integrating strong points of domestic and foreign similar products, suitable for systems with AC 50HZ and rated working voltage 12kV,satisfying demands of power supply, distribution and motor control and conforming to standards like IEC60493-1, IEC60947 and GB7251.1.
cabinet material:: 2mm cold-rolled steel or imported galvanized alum board; cabinet size:: to demand; rated insulation voltage: <1000V; aboslute attitude: <=2000m;
SDC type SF6 fully insulated compact switchgear assembles the functional units in SF6 closed stainless steel chamber without any live parts exposed. It has the advantages of full insulation, full sealing, compact structure and convenient installation and operation.
FLRN36-12 indoor AC high-voltage SF6 load break switch is an indoor switch equipment with 12kV rated voltage. The equipment adopts SF6 as gas arcing and insulation medium, including three phases which are opening , closing and earthing, It has the advantages of small volume, convenient installation and strong adaptability to the environmental.
XGN type is the newest AC metal enclosed HV ring main unit with the SF6, which is suitable for distribution automation, compact and extensible , simple structure, flexible operation, reliable interlocking, and modular design to realize any combination, meet all kinds of connection mode.
Brand Name: HXXN; Model Number: KYN28-1735; Type: Withdrawable; Rated Voltage: 7.2kV/12kV/17.5kV/24kV;
CYS-C are integrated SF6 gas insulated switchgears(GIS) and applicable to power system of three-phase AC 50/60Hz, 3.6-24kV. They transmit & distribute power and control, protect & monitor power network.
iSafeRing is a SF6 insulated ring main unit for the secondary distribution network. iSafeRing can be supplied in 10 different configurations suitable for most switching applications in 12/24/36 kV distribution networks.
iUniswitch, the light flexible switchgear developed as a modular, simple to apply design, with fewer components, providing a high reliable, quality and safe product for you, our Customer.
Operation Voltage: 10-24kv; Brand: Tianan; Specification: IEC60076-1, IEC60076-2, IEC60076-5; HS Code: 8537209000.
<div>Ratings: system voltage 3.6kV, 7.2KV, 12KV, 24KV,rated current up to 4000A, AC three phase 50/60HZ.</div>
In the system of 50Hz, 3.6~12kV and below, for making and breaking of load current and short-circuit current, controlling and protecting.
Structure: Floorstanding; Trademark: CNHK; Specification: ACCORDING TO CUSTOMER′S REQUIREMETNS; HS Code: 8537109090.
The PIX system has been designed in accordance with international (IEC) standards, and gives an optimal solution to satisfy the requirements for MV electrical networks.
KYN28 metal clad withdrawable AC metal enclosed switchgear is a combination and development of the advanced technology both at home and abroad.
KYN28-12 switchgear/switch cabinet/switchboard/high voltage panel is a set of power distribution device of rated voltage 3 to 12KV three-phase AC 50Hz of single bus bar and single bus bar segmental system.
Schneider MVnex metal-clad withdrawable switchgear is authorized to be manufactured by our factory with full support from Schneider Electric.
Schneider NEX40 metal-clad withdrawable switchgear is authorized to be manufactured by our factory with full support from Schenider Electric.
ABB UG550 medium voltage, air-insulted, metal-clad withdrawable switchgear is available up to a maximum panel current of 1250A.
MVset metal-clad withdrawable switchgear is suitable for 3-phase AC50Hz, up to 12KV single busbar and single busbar section system.
