Quick Details
Description
Performance Features of High Quality Sponge Iron Briquette Machine Price
1. To ensure normal operation of the high-temperature sponge iron ball briquette, before the sponge iron materials go into the ball press machine, such feeder machine must be used whose sponge iron feeding amount can be adjusted.
2. The equipment in front of and behind the sponge iron ball press machine must realize chain program start and stop with this ball press machine.
3. After the normal begins normal operation, regularly check whether the connecting parts are fastened.
4. When dismantling and changing the bearing of the ball press machine, adjust the radial internal clearance of the bearings that must conform to the standard.
5. The lubricating points of the fixed bearing pedestal and the sliding bearing pedestal of the sponge iron ball press machine must be added oil on time and the chamber must be maintained 80% lubricating grease. When adding oil to the driving support, the oil must be able to be squeezed out from the shaft end of the pre-pressing device.
6. Clean the hydraulic oil pump and oil filter after one month. Clean the oil box after 3-6 months. The environment temperature of the hydraulic station in winter should be below 5℃.
Working Principle of High Quality Sponge Iron Briquette Machine Price
High quality ponge iron briquetting machine price has similar working principle with high pressure ball press machine. Through the pre-pressing device, the sponge iron materials are eliminated with gas and compressed and forced into the space between the two rollers that are rotating with the same speed and at the opposite direction inside the briquette machine, and then the sponge iron materials will be pelleted. With the continuous rotation of the pressing rollers of high quality sponge iron briquette machine price, the sponge iron balls will fall off under the surface tension and gravity.
Technical Data of High Quality Sponge Iron Briquette Machine Price
| Model |
Roller diameter (mm) |
Nominal roller breadth (mm) |
Max. total pressure (t) |
Max. linear specific pressure (t/cm) |
Main motor power (kw) |
Production capacity (t/h) |
Weight
(t) |
| FTM650-200 |
650 |
200 |
240 |
12 |
90 |
12 |
23 |
| FTM750-300 |
750 |
300 |
360 |
12 |
185 |
28 |
36 |
| FTM1000-500 |
1000 |
400 |
480 |
12 |
315 |
45 |
58.5 |
| FTM1200-800 |
1200 |
500 |
600 |
12 |
500 |
65 |
129 |