Gold separator
Introduction of gold separator machine for gold recovery plant
1: continuous centrifugal concentrator are best suited for extracting valuable minerals from materials which containing a small amount of high density minerals, especially for the recovery of gold, but also potential to recover any mineral that has high density .
2: excellence gravity concentrator in mineral processing , specialize in the recovery of Placer / alluvial gold , rock / lode / gangue gold , platinum, silver, copper , tin , tungsten, pb , zn
3: user-friendly , discharge concentrate automatically within two minutes
4: Enrichment ratio as high as 1000 times .
5: feeding sizes from 20 micron to 6 mm
6: A replacement of previous manual discharge centrifugal concentrator series which require manpower to discharge concentrate And also a replacement for those low recovery but high labor requirements gravity equipments such as jigs, conventional carpeted sluice, pulsating sluice and spiral chute .
How gold separator machine for gold washing plant works
1 : Clean water is introduced into the concentrate cone through the hollow shaft then injected through a series of fluidization holes to create bed fluidization to avoid compaction of concentrating bed.
2 : feed slurry is then introduce through the feed tube and into the concentrator cone .
3 : When the slurry reaches the Deflector pad it is forced outward and up to the cone wall by centrifugal force .
4 : The slurry fills into each groove/ring to create a concentrating bed.
5: High specific gravity particles are captured and retained in the grooves, the light particles flow out from cone .
6 : Upon completion of recovery cycle , concentrates are flushed from the cone and flow into the concentrate trough automatically, and the discharging process complete within 2 minute .