Fast wire-cuting machine DK7735

	unit	DK7720	DK7725	DK7732	DK7735
Work table travel	mm	200*250	250*320	320*400	350*350
Work table dimensions	mm	280*420	340*500	360*600	390*630
Maximun load capacity	KG	100	200	300	300
Machine weight	KG	800	1000	1420	1440
Machine dimensions	mm	1160*810*1300	1480*1010*1400	1660*1330*1400	1660*1330*1400
Maximum cutting thickness	mm	200	400	400	400
Maximum cutting taper	mm	Straight line	±3º \80mm	±3º \80mm	±3º \80mm
efficiency	mm²
Supply Voltage	v	50HZ\220\380 ±10	50HZ\220\380 ±10%	50HZ\220\380 ±10%	50HZ\220\380 ±10%
Power Capacity	KW	1	1	1	1

cnc wire cut edm machin -- Optional:

Features of the cnc wire cut edm machine：

1. Special supporting design of the machine with high strength and heavy loading capacity.
2. The machine uses the V-shape long span and long guiding rail structure lined with steel which helps the stability.
3. The feeding wire part of the machine uses the driving system of gearwheel with lower noise and longer life.
4. The maximum diameter of molybdenum wire is <= 0.25mm.
5. The wire tube uses the chroming material with good wear resistance.
6. The cutting accuracy of all direction is less than 0.01mm.
7. Use high precision ball screw, which has high transmission efficiency, good positioning accuracy, long life and well synchronization performance.
8. Use the high precision guide rail with high strength, heavy loading capacity and low resistance.
9. High stability of the machine. The failure rate is almost 0.
10. Apply beakless soft reversing, which prolongs the service life of reversing key.
11. All the machine applies the high precision guide wheel appliance to enhance the accuracy of cutting.
12. All the machine-tools use the laser interferometer to test the accuracy. (Renishaw Laser Test System from the great Britain).

Main functions of HL wire-cutting system:

1. A multi-control function, that one computer can controls as many as four machines to cut different work-pieces at the same time, and programming while processing .
2. Taper processing adopts a 4 0r 5-axis link-move control technology. The two taper machining methods of top-bottom different shapes and simply angle-input, make taper processing become faster and easier. It can also process changed-taper and equal arc.
3. Simulate machining, fast show machining track, particularly the track of that taper and top-bottom sides of top-bottom different shape work-piece, and display the coordinates of final point.
4. Real-time display graphics machining process, by switching the screen, monitoring the machining status of four machines at the same time, and shows the relative coordinates of X, Y, J and absolute coordinates of X, Y, U, V, and other changed value.
5. Power off protection, that sudden power off during machining, after power on, each machine automatically returns to machining status. The storage documents in system can be long-term retained.
6. Accurate adjust calculation to the base-plane and wire frame distance. Offset in U and V direction to the offset by the guided pulley cutting point, to enhance the accuracy of taper machining, the accuracy of big taper cutting is significantly better than similar software.
7. Scan gallery to quickly find the necessary documents.
8. Mo wire offset (not necessarily increase the transition circle), the machining scale adjustments, coordinate transformation, the recycle machining, the stepper motor speed, automatic short-circuit regression, and other features.
9. Can start machining from any segment, and stop at any segment. Can forward l reverse machining.
10.  Can set (or cancel) at any time pause after machining present segment instructions.
11. Pause, stop and short-circuit automatically rolled back and short-circuit long time (one minute) alarm.
12. Data conversion between AUTOCAD DXF format and ISOG format.
13. Access to customer network systems, exchange of data and monitor each machining process in network system (option).
14. Machining interpolated radius up to 1,000 meters.
15. Machining automatically accumulate working hours, easy for production management.
16. Machine installed with optical scale, can realize closed-loop control.
17. Multi-time cutting function designed for middle wire-speed machine.

TaiZhou MotionTuner Mechanical & Electronic Co., Ltd. is a Trading Companies of wire cutting edm machine with well-equipped testing facilities and strong technical force.
With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in Mold processing,Products processing, and other industries.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success