1.This series lathe adopts the traditional horizontal lathe layout and overall design, good rigidity and safety standards. Bed, headstock and other major basic parts are made of resin sand casting, artificial aging treatment, machine stability is superior. Bed rail surface quenching, improved rail life.
2. The function of this machine is complete, and simple operation, stable precision and reliable work are all its advantages
3.The machine headstock joystick centralized control, easy to manipulate and flexible, three-point bearing spindle system, front and rear bearings, high precision, rigidity, and the pros and cons of the spindle brake is hydraulic control to change, brake sensitive and reliable .
4.The machine tailstock sleeve bore metric 80, tailstock clamping means clamping from above, tailstock clamping reliable, tailstock overall rigidity increases
5. The machine adapt to the needs of domestic and foreign markets, with a full range of warning signs, safe, reliable, easy to operate, the overall shape is nice .
6.The machine's accuracy according to the national standard GB/T4020-1997 "horizontal lathe accuracy test." The standard is used to modify the ISO 1708:1989 "Acceptance conditions for greneral purpose parallel lathe-Testing of the accuracy
|
Item
|
CW61125M
|
|
Max work piece length, mm
|
6000
|
|
Bed width, mm
|
755
|
|
Max turning length, mm
|
1300-11800
|
|
Spindle through hole diameter, mm
|
130/(5’’)
|
|
Main spindle taper
|
Metric 140
|
|
Spindle turning number and kind
|
21/12
|
|
Spindle turning range, r/min
|
3.15-315/3.5-390
|
|
Vertical and horizontal feed kinds of each knife rest
|
56 kinds
|
|
Feed range of knife rest,mm
|
0.1-12/0.05-6/0.025-3
|
|
Metric thread range and kinds, mm
|
1-120 44 kinds
|
|
Inch thread range and kinds,
|
28-1/4 31 kinds
|
|
Modulus thread range and kinds, mm
|
0.5-60 45 kinds
|
|
Diametral pitch range
|
1/2-56DP 38 kinds
|
|
Tool section
|
45×45
|
|
Max horizontal travel of slide board, mm
|
-50-580/665/725/825
|
|
Max travel of up knife rest
|
300(12’’)
|
|
Tailstock center sleeve diameter, mm
|
160(6’’)
|
|
Max travel of tailstock center, mm
|
300(12’’)
|
|
Main motor power, k w
|
22
|
|
Machine length, mm
|
8950
|